Goodbye to my first Jet Ski

May 16, 2023

I have spent the last 8 months (off and on) working on the 1996 Seadoo GTI (came with a trailer) that I purchased for $400. For information on what I did to repair the Seadoo, see my two previous posts listed below:
  1. Buying a $400 Seadoo
  2. Rebuilding my first Carb
Even though we are entering summer and the jet ski would be perfect to have, sometimes it is best to sell while a vehicle is running perfectly (and before the next inevitable problem). I also have the upcoming Cannonball Run road trip that I need some funding for. That said, I made the decision to prepare the Seadoo to sell.

First and foremost, I took some before pictures. Needless to say the Seadoo was disgusting prior to cleaning.






I spent about 4 hours cleaning the Seadoo with all different kinds of chemicals (all healthy to breathe I'm sure) and removed the rubber padding on the hull (it was coming up and actually becoming a hazard for tripping). This was by far the most time that I have ever spent cleaning a singular vehicle, but I think the time was worth the effort. Here was the outcome:










While I am not a fan of cleaning, I am the first to admit that the most important step in selling anything is the process of making it look good. The pictures only do it some amount of justice, but there was a tremendous improvement between before and after the cleaning.

The next day I did some market research (primarily Facebook Marketplace) to determine a fair-market value for the Seadoo. I settled at $1,600. While that may sound cheap for a solid jet ski and trailer, it is a 26 years old and not cosmetically perfect (few scuffs, hour gauge doesn't work, etc.). I listed it for $1,600 and within a week an individual from an hour away contacted me and wanted to purchase the Seadoo. He came the same day he initially contacted me and could not have been more excited to buy it. Here was the last picture that I took as the new owner drove it off:


In total, I spent ~$700 on the jet ski and sold it for $1,500. I put an estimated 20 hours on it over the course of several months. While this was not my largest flip, it was probably the one that I enjoyed the most!

I thoroughly enjoyed learning to work on Seadoo products and now have a new appreciation for carbureted 2-stroke engines. I am sure that I will find myself working on another Seadoo in the near future (post-Cannonball Run)!

Comments

Post a Comment

Popular posts from this blog

Release of 2025 Toyota 4Runner

Image
April 9, 2024 I'll go ahead and preface that all information coming from this article comes from Forbes who seemingly accidentally released the 2025 Toyota 4Runner press release at 10:15AM EST on April 9th rather than 10:15PM EST on April 9th. Their post has since been taken down, but not before information could be grabbed. Obviously, I am a fan of the Toyota 4Runner. In total, I have had 4 of them and am actively looking for a fifth (and potentially a sixth depending on next generation). If you want more information on my favorite 4Runner, see my article here . Release of the 2025 Toyota 4Runner Forbes accidentally released the first information and images on the next generation (6th) Toyota 4Runner. Here's a quick recap of that information: Like prior 4Runners, the new model also shares a lot with the latest Tacoma midsize pickup including the powertrains. Toyota’s increasingly ubiquitous 2.4-liter turbocharged four-cylinder will be under the hood of all sixth-generation 4...
Read more

LX570 Maintenance How-To - Radiator & Associated Items

Image
April 14, 2023 A couple of days ago, I made a post showing the failure point of the early stock 200 Series Land Cruiser (or LX570 like mine) radiator and the other parts/components (with part numbers) that I intend to replace while doing it. My LX570 is at 150K miles on the dot at the time of doing this maintenance. I was able to find several videos about replacing the radiator, but some of the other maintenance items that I was trying to tackle (specifically the fan assembly bracket) were pretty hard to find information on. Removing the Fan and and Radiator This is probably the best documented part of the entire process. Below is the video that I followed to remove it (remember that the Tundra is essentially the same car as the 200 series underneath) Here were a couple of notes from the process that I experienced: You will have to disconnect transmission lines from the radiator and will therefore lose a little transmission fluid (not to mention what is actually in the radiator at tim...
Read more

The Unconventional Thought Processing to LIFT a $100K Lexus LX570!

Image
December 18, 2023 I am going to preface this post with some brief information regarding the Lexus LX570 (and similarly the Land Cruiser 100 Series specifically equipped with the Adjustable Height Control (AHC) system). AHC is a suspension system capable of lowering for easier entry/exit from the vehicle and lifting allowing for more capability off-road. Unlike most other adjustable suspensions, AHC leverages hydraulics rather than air (how must adjustable suspensions operate) to lift and lower the vehicle. As you will soon find out these systems are fantastic when they work, but when they fail it can lead to EXTREMELY costly repairs depending on the specific failure point(s). The Cannonball Run  that Jake and I completed was an unbelievable trip. By the end, we were both absolutely exhausted. But just because we were exhausted did not mean that the automotive escapades would be stopping (or even slowing down)… Two weeks after arriving home from the trip, I was in north Georgia with...
Read more