Signs of LIFE for the Kawasaki Vulcan after a Decade

June 14, 2023

If you missed my last post on my latest purchase (a 1999 Kawasaki Vulcan that I picked up for $1), check it out here.

After getting the motorcycle off the trailer (FYI these Harbor Freight trailers are fantastic), the first thing I did was break out the pressure washer to give this thing a formal spray down. I did what I could to avoid hitting the mechanical areas (engine, transmission, etc) directly just in case there was a significant leak. I was pretty impressed with the outcome after the 5 minute spray down:


I am not a patient person. The next thing I did was roll the bike into the garage and immediately start thinking through what I should do. There's 4 things that are required to make something run:
  1. Air
  2. Fuel
  3. Spark
  4. Compression
If you want a more thorough explanation on how these 4 required items, others can do a better job of breaking it down than I can. Here was one video that would be helpful:


First thing I checked were the twin airboxes (one on each side). I did a poor job documenting it and forgot to take pictures, but this was SUPER important to check. The air filters had completely disintegrated and if I had skipped this step I would have sucked all kinds of air filter material into the intake very likely damaging the engine. Air is the easiest thing to check, so I am glad I started here.

The next item was fuel. Since this bike had been sitting over a decade, I knew it would have bad gas and would need to be drained. To make matters better, the gas cap was locked shut and would not budge. The idea of drilling into a full gas tank (even with bad gas) sounded stupid (spark + gas = BOOM), so I tried prying the gas cap open. Do yourself a favor don't try and pry a motorcycle gas tank open, especially one in cosmetically good shape; you'll manage to dent the hell out of it like I did...


After damaging the gas tank and becoming mildly infuriated, I decided to take the smarter approach (and what I should have started with). I disconnected the tank from the bike, pulled the petcock out (which was COMPLETELY disintegrated) and drained the tank. Why I didn't take this approach to begin with is beyond me. Then I took my drill with a bit and destroyed the gas cap (no explosion, WOOHOO!). Finally it was time to clean the tank. I followed this video:


After the third time cleaning it out, this is what I got out of the tank (the first 2 times were even worse).



I ended up cleaning out the tank about six times before it finally cleared all of the gunk out. I replaced the fuel lines, installed a new petcock, and put the tank back on the bike. To finish the gas side up I added about a gallon of fresh gas.

Next, I shifted to the electrical/spark side of things. I bought a new battery because my old one was not even worth trying and pulled the spark plugs to inspect. The Vulcan 750 is a large 2-cylinder with 2 spark plugs per cylinder, so I checked on all 4. The spark plugs looked great (like WAY better than expected)! 


As mentioned above, I am not patient. I did not want to do a compression test on the motorcycle and just hoped for the best since it would require both time and effort. I figured that it was either going to start or it wasn't, so might as well just try. Here's the first try (spoiler alert, it failed):


There were signs of life, but it failed. After literally HOURS of research and continued failures, I actually had an idea of what may be causing the problem and gave it one final try. For the first time ever I actually did a good job breaking down in video what the problem and solution were.


After the failure to start my Suzuki GS1100 months ago, I had been wanting to resurrect a non-running motorcycle. The level of excitement that I had from this starting was second to none! To be clear, the objective of this bike is not to ride, but to serve as a learning experience for me.

Now that I had the motorcycle running, it was time to start fixing the things that were wrong and there is quite a LONG list. In my next post, I'll dive into those items including:
  • Carburetor rebuild 
  • Dual front caliper rebuilds
  • Rear brake shoes
  • Air filters
  • Oil change


Comments

Post a Comment

Popular posts from this blog

Release of 2025 Toyota 4Runner

Image
April 9, 2024 I'll go ahead and preface that all information coming from this article comes from Forbes who seemingly accidentally released the 2025 Toyota 4Runner press release at 10:15AM EST on April 9th rather than 10:15PM EST on April 9th. Their post has since been taken down, but not before information could be grabbed. Obviously, I am a fan of the Toyota 4Runner. In total, I have had 4 of them and am actively looking for a fifth (and potentially a sixth depending on next generation). If you want more information on my favorite 4Runner, see my article here . Release of the 2025 Toyota 4Runner Forbes accidentally released the first information and images on the next generation (6th) Toyota 4Runner. Here's a quick recap of that information: Like prior 4Runners, the new model also shares a lot with the latest Tacoma midsize pickup including the powertrains. Toyota’s increasingly ubiquitous 2.4-liter turbocharged four-cylinder will be under the hood of all sixth-generation 4...
Read more

LX570 Maintenance How-To - Radiator & Associated Items

Image
April 14, 2023 A couple of days ago, I made a post showing the failure point of the early stock 200 Series Land Cruiser (or LX570 like mine) radiator and the other parts/components (with part numbers) that I intend to replace while doing it. My LX570 is at 150K miles on the dot at the time of doing this maintenance. I was able to find several videos about replacing the radiator, but some of the other maintenance items that I was trying to tackle (specifically the fan assembly bracket) were pretty hard to find information on. Removing the Fan and and Radiator This is probably the best documented part of the entire process. Below is the video that I followed to remove it (remember that the Tundra is essentially the same car as the 200 series underneath) Here were a couple of notes from the process that I experienced: You will have to disconnect transmission lines from the radiator and will therefore lose a little transmission fluid (not to mention what is actually in the radiator at tim...
Read more

The Unconventional Thought Processing to LIFT a $100K Lexus LX570!

Image
December 18, 2023 I am going to preface this post with some brief information regarding the Lexus LX570 (and similarly the Land Cruiser 100 Series specifically equipped with the Adjustable Height Control (AHC) system). AHC is a suspension system capable of lowering for easier entry/exit from the vehicle and lifting allowing for more capability off-road. Unlike most other adjustable suspensions, AHC leverages hydraulics rather than air (how must adjustable suspensions operate) to lift and lower the vehicle. As you will soon find out these systems are fantastic when they work, but when they fail it can lead to EXTREMELY costly repairs depending on the specific failure point(s). The Cannonball Run  that Jake and I completed was an unbelievable trip. By the end, we were both absolutely exhausted. But just because we were exhausted did not mean that the automotive escapades would be stopping (or even slowing down)… Two weeks after arriving home from the trip, I was in north Georgia with...
Read more